Provides a low-cost, high-quality repair for damaged rear window defogger grids. Complete kit for a superior repair. Quick Grid™ is the result of a joint research project with the General Motors Research Center.

• Repairs breaks in defogger grids
• Highly conductive
• Color match formula for undetectable repair
• Quick and Easy 30 minute repair
• Complete Kit

CONTENTS:

• 1 Brush
• 1 Bottle Repair Compound - Net 0.05 Fl. Oz. (1.4 mL)
• 1 Stencil

DIRECTIONS:

1. Determine which grid line(s) is/are broken and where the repair needs to be done. Do this visually, or use a test light or volt/ohmmeter.
2. Turn off the rear defogger unit.
3. Clean the inside surface of the glass with common glass cleaner.
4. Remove the protective backing on the stencil.
5. Carefully place stencil over repair area, making sure to align both ends of the broken grid line within the stencil cut-out. Press stencil firmly to the glass.
6. Shake bottle of repair compound well.
7. Apply repair compound with the brush. Make sure to overlap both ends of the broken line with repair compound.
8. After the surface is tack-free, about 1 minute, repeat repair compound application. Do this 3 times. Recap bottle of repair compound tightly.
9. Wait 20 minutes and then carefully peel off stencil from glass.
10. Wait 24 hours before turning defogger on.
11. To clean brush for future application, use acetone (nail polish remover).

You may also with to view the Rear Window Defogger Repair Kit MSDS or Technical Data Sheet.