Cross-Hatch Test Tape Suitable for ASTM D3359 Adhesion Testing, 60 Yd roll
Manufactured specifically as a replacement for the now Discontinued Permacel P-99!
Would you like a Certifcate of Conformance to accompany your order (free)?
Introducing the Permacel P-99 Replacement that's just like the original -
The SEMicro CHT line of Cross Hatch Testing Tapes!
If you are a user of ASTM D3359, then you are most likely already familiar with the Permacel P-99 tape. It was the only tape listed in the standard as being reported to be suitable for the purposes of the standard. Unfortunately, Permacel discontinued the manufacture of P-99, leaving users of the D3359 wondering how they can maintain some level of consistence and continuity in their testing processes.
As respected members of the adhesion testing community and as ASTM members ourselves, we at SEMicro undertook the challenge of finding possible alternatives. What we found was surprising - there really is no off-the-shelf tape like the P-99. The next closest tapes had an adhesive strength substantially higher or lower than the P-99. The use of one of these tapes
as a substitute for the P-99 would often result in a different classification rating when compared to results with P-99! This explains why ASTM had only listed Permacel P-99 in the footnotes. No other product had been reported to provide consistent, reliable results.
At that point we approached our formulator to examine the components of the P-99: the adhesive, the backing, etc. We challenged them to develop a product that we could say was a direct replacement for Permacel P-99 so we could provide users of D3359 with a seamless transition from testing with P-99 to testing post-P-99. We have no doubt you'll agree that we succeeded!
Large Quantity discounts available. Please call (301) 975-9798 for details.
|Material||Adhesive Type||90 sec Peel Test [oz/in]||Shelf Life [months]||Liner?|
| Permacel P-99 || Synthetic Rubber ||61*||12||No|
| SEMicro CHT || Synthetic Rubber ||59*||12||No|
*Listed data is based on the results of independent testing performed by ChemSultants International.
Samples were tested following a 90 second dwell time in accordance with PSTC-101. 10 tests per sample were performed and averaged.
Listed adhesion values may differ from published adhesion values due to the difference in dwell time (ASTM D3359 stipulates that the tape should be removed within 90 seconds +/- 30 seconds from application).
You also wish to view the CHT MSDS or CHT Datasheet.
Please note: This Material Safety Data Sheet (MSDS) and Datasheet were prepared solely for the reference of and as a courtesy to SEMicro customers.
The adhesive tape product to which this MSDS refers is a manufactured item that meets the definition of an “article” under the OSHA Hazard Communication Standard (“Standard”),
which exempts articles from the requirements of the standard, including the requirement to provide an MSDS.